craigslist | tools in east idaho

2 1/4 ton floor jack (Ammon) $20

2009-11-28T15:21:13-07:00

Small Craftsman rolling hyd. floor jack with two jack stands. 20.00

Miter Saw (Idaho Falls)

2009-11-28T15:04:38-07:00

10 inch 120 Volt Ryobi miter saw. Only used 3 times, we ended up using a table saw and skill saw for our deck. Asking $80.00 obo call 206-2994

Christmas Present! Lathe and Gouges (Idaho Falls) $500

2009-11-28T14:34:22-07:00

RIGID Lathe, SEARS Duplicator, DELTA Gouges. $500 for the whole package! The lathe has only been used for a few hours. It was a tool that we realized we didn't need. All the pieces and parts are accounted for and present for the lathe and duplicator (there are 2 rests also). This would make a great Christmas gift for a hobbyist, or woodworker! Also willing to sell the pieces separately, but the package is preferred.

MATCO Road Box (Firth, ID) $1500

2009-11-28T12:52:15-07:00

MATCO road box. In good condition, just a little dusty from sittin in my garage.

MRDBX11RB
Serial # 00541224
Mfg. Date 01-14-05

Matco tool box must see hot rodder tool box (ammon)

2009-11-28T11:27:11-07:00

All most new tool box Marco 5 tool box lots of space use but well taken care of no dents at all looking for trades and best cash offer as well. If its some thing you want to trade take a pic and send it to me @ Seppyauto @ hotmail. Thanks for looking open to just about any thing so just let me know thanks. .............

Snapon snap-on Mac tools cheap fast rat rod hot rod gofast cool

20 gal Portable Compressor w/50ft Hose reel (Mackay) $175

2009-11-28T10:31:04-07:00

20 Gal Portable Air Compressor with 50ft Hose Reel
120volt/15 Amp MADE IN USA [translation:not junk] compressor on wheels. I couldn�t find the exact compressor to get the cfm/psi rating from but looking on Powermate�s web site they say comparable replacement would be 6.0 cfm @ 90 psi and a new cost of $450. 'I can't make out the cfm/psi ratingoff of the worn tag but I would think it's pretty close to that. I�ve used it with paint guns, nail guns and air wrenches and never had a problem with it. I replaced the regulator last year due to a broken gauge. Works great, just and don�t have any use for this one anymore. Included is a 50 ft wind up hose reel. I�m located in Mackay but I�m usually in Idaho Falls once a week and I can bring it if someone is interested. Call Paul at 208-360-2301 leave a message. $175.obo

Bosch 12" Compound Miter saw, works good (Rexburg,ID) $275

2009-11-28T08:06:38-07:00

Bosch 12" compound sliding miter saw. Works good, has been use for three years. There is a crack in the handle from trying to put it into the truck and closing the tailgate on it. See picture. Call or write with questions. Paid $675.00 3 years ago. $275.00 obo.

DAMAGED 24' Louisville Fiberglass Extension Ladder (Pocatello, ID) $50

2009-11-27T16:44:33-07:00

We have a damaged 24' Louisville Fiberglass Type 1A 300Lb Extension Ladder for sale for $50.
It's been cracked along the side during shipping and is not safe for use, but can be used for spare parts.
Or it can be used as a 12' ladder as only one of the parts was damaged.
We are selling it because we are getting ready to move out of the state.

Color Orange / Silver
Material Fiberglass
Type Extension Ladder
Weight 50 lb
Capacity 300 lb
Base Width 17 1/16"
Extended Length 21 ft
Step Size 3 1/4"
Step Width 13 11/16"
Shipping Weight 50.0 lbs.

Please e-mail me with your phone number so I can contact you with details.
Must be able to come and pick it up.
Don't be shy and make an offer.

24' Louisville Fiberglass Extension Ladder (Pocatello, ID) $225

2009-11-27T16:30:12-07:00

We have a 24' Louisville Fiberglass Type 1A 300Lb Extension Ladder for sale. It is brand new, never been used.
We are selling it because we are getting ready to move out of the state.

Color Orange / Silver
Material Fiberglass
Type Extension Ladder
Weight 50 lb
Capacity 300 lb
Base Width 17 1/16"
Extended Length 21 ft
Step Size 3 1/4"
Step Width 13 11/16"
Shipping Weight 50.0 lbs.

Please e-mail me with your phone number so I can contact you with details.
Must be able to come and pick it up.
Don't be shy and make an offer.

Dust Collector (Pocatello Idaho) $350

2009-11-27T16:10:53-07:00

Jet Dust Collector Model DC-1182 With hoses and some connectors.
240 Volt 2 HP 1-phase 24 Amp Motor. Call John at 244-4641

18v milwake sawzall (idahofalls) $100

2009-11-27T14:44:52-07:00

18v milwake sawzall my charger broke then the batteries got stolen it works good $100.00 no E-mails call brian 403-1695

18v dewalt (Idahofalls) $200

2009-11-27T14:37:47-07:00

new 18v xrp drill will do lithium ion batteries - older 18v radio works good has aux port and will charge and work off batteries - 3 xrp 18v batteries and 1 charger no e-mails call Brian 403-1697 $200.00 for all

Riding Lawn Mower (Pocatello) $450

2009-11-27T12:38:54-07:00

Nice riding lawn mower with grass catcher. $450 or best offer. call or text. 208-220-3106.

2 HP Plunge router (Idaho Falls) $70

2009-11-27T10:26:35-07:00

Skil Classic 2.0 hp Plunge router. Like new includes 2 bits. I bought this a few years ago and I never use it. It has been used only a few times, I made one shelf with it. 70 dollars or make offer

Snow Plow for UTV (Rigby) $450

2009-11-27T09:59:38-07:00

I have a snow plow for a UTV (side by side) with mount
Made by Swisher Hardley used
450.00 521-1373 cash only

�Plow can be installed and removed in seconds without tools
�Rugged 62" multi-purpose plow for a wide swath
�1/8" corrugated steel plow delivers powerful snow-breaking and terrain-leveling capabilities
�Plow has 18"-24" lift height for clearance, depending on vehicle and tire size
�Plow angle can be easily adjusted from the seated position
�Unique dual-locking angle position holds plow where you set it
�Reversible and replaceable cutting edge

http://www.swisherinc.com/utv_plow.asp

IR HYD. COMPRESSOR (ID)

2009-11-27T09:23:34-07:00

NEW 40 CFM HYD. DRIVE COMPRESSOR NEVER USED OVER $5000.00 WHEN PURCHASED CALL 208-850-2442 IF INTERESTED THANK YOU

6.5 HP Snow Blower with Tracks (Driggs) $425

2009-11-27T08:14:29-07:00

I've had this snow blower for two winters and it's amazing! It has a brand new 6.5 hp Power Max engine and it runs very very well in the cold weather. This machine has 5 forward gears and 3 reverse gears. I am moving to much warmer territory so I need to sell my snowblower.

Call Dave at 208-709-2559

Thanks for looking!

loading ramp set - arched folding $198

2009-11-26T18:34:11-07:00

loading ramp set - arched folding 2 pairs left in stock. Only $198 (includes tax) for pair of loading ramps aluminum, light. Fold for easy hauling & storage. Large capacity 1500 lb or 750 each. NEWarch set come with security straps. For loading 4 wheeler or go-cart. When loading riding mower the deck won't catch.....drive it on!!!!!
237-2009 see today M-Sat

* NEW * Honda Portable Air Compressor (Rexburg) $1100

2009-11-26T11:35:47-07:00

This is a top of the line 10 gallon heavy duty Air Compressor with a Honda motor. It is New and has never been used other than starting up for demonstration only. Please call with any questions or to make an offer.

Cory Sorensen
208-403-4510

NEW Honda 3 inch Water pump (Rexburg) $300

2009-11-26T11:35:38-07:00

This is a new pump that has never been used and still has not been filled with lubricant. Pump comes with adapters for different size pipe up to 3 inch. Please call for info.

5 horse power

Cory Sorensen
208-403-4510

3500-watt Craftsman Generator (Idaho Falls) $500

2009-11-25T17:23:11-07:00

i have a 3500-watt Craftsman Generator for sale. its a gn-190 with overhead valve, industrial engine, 6.5 horsepower. the plug-ins are: (120/240-volts, 20A A.C.)(120-volts, 30A A.C.)(12-volts, D.C.)
(120-volts, 15A A.C.). it also has an idle controll switch and circut breaker buttons. it has been clean of all fluids. it runs perfectly. and generates power to the full extent. Need to sell ASAP to pay bills. my name is Mr. Taylor call or text me at (208)-680-7518 or drop me an email at unwantedstain@hotmail.com thank you

Snow Thrower (Rigby) $200

2009-11-25T14:45:22-07:00

5 HP Yardman snow Blower 21" single stage
runs well 4 cycle elect start.
200.00 cash only, no scammers
no trades. 521-1373

water cooled tig torches/water circulator (Idaho Falls) $125

2009-11-25T11:06:46-07:00

for sale are two water cooled torches. weldcraft. one of the coolers is a tweako the other one is a bernard. I also have air cooled torches, an argon bottle, flowmeters, k3000 gouging lead, and lots of other welding stuff!

Snow blower for riding tractor -Make Offer (Pocatello) $399

2009-11-25T10:28:15-07:00

SNOWBLOWER for rider mower. $399 Remove deck and install this auger setup. Made for MTD. could be made to work on other brands
about 4 years old. Cost about $700 new
replaced one bearing. See me soon (not available Sundays)
call 237-2009

Wood Lathe (Blackfoot) $350

2009-11-25T05:31:03-07:00

Craftsman 12 x 37 Wood lathe,comes with 10 gouges of various sizes, Diameter Sizing Gague,Craftsman Copy Crafter, all instruction books. It is mounted on a sturdy metal stand with a wood top and 2 drawers.This is in exellent shape, used very little. IF YOU ARE SERIOUS,Contact me for a time to see it or I will get some photos to you. Call Don at 208-681-2808 or 280-684-4276.

Milwaukee 18v Drill Brand New (Rigby) $160

2009-11-24T22:08:28-07:00

I have a brand new Milwaukee 18v lithium Ion drill. I bought this a week ago and used it honestly for 20 min. I decided to buy a Impact drill cause it is more what i needed. So I need to sell this one. Comes with case charger and two Lithium Ion Batteries. This Retails at 249.99, taking a big hit on this but just rying to recover some money to make the wife happy. Please call or text anytime 208-360-9569...... Thanks for looking

Propane Heaters and 100 # Bottles (IF) $1

2009-11-24T18:44:12-07:00

ALL PRO forced air heaters. 50,000 to 85,000 BTU in near new condition. $ 75.00 each. (2) available

100# propane bottles. $ 75.00 for near empty one. $ 125.00 for the other plump full and ready! Will consider trade for shop tools and guns. Call 208 522-0082. or mail me with any questions. Thanks

PLEASE CALL THE NUMBER RATHER THAM MAIL ME. I CAN NOT SEEM TO REPLY TO MAILS ON CRAIGS LIST. i DO NOT KNOW ANYTHING ABOUT CUTTING AND PASTING WHICH SEEMS REQUIRED HERE. THANKS

Pick-up Bed Trailer (IF) $1

2009-11-24T18:20:40-07:00

Chevy 3/4 ton Camper Special pick-up utility trailers. New Wildcat tires on each, ( worth a $100 each!) and a spare for both. 2" Balls.
BLUE one needs some simple wiring work- $ 450.00
TAN one needs right tailight cover, and does not have a tailgate- $ 400.00 OBO and trades considered guns and shop tools.

Call 208 522 0082 0r mail me for more information or questions. Thanks

Shopsmith Mark V (Idaho Falls) $1200

2009-11-24T10:46:36-07:00

Shopsmith Mark V, Band Saw, Jointer, and sander 1200.00
Call 589-3193

No Spammers
No Out of Staters!

Lincoln Stick Welder (Teton Valley) $100

2009-11-23T23:51:23-07:00

I got this in a trade deal and I honestly can't say if it works. The guy told me it does but there is no plug on the power cord and even if there was, I have no place to plug it in at in my house. Its a 225 amp, 230 volt. Like I said, I HONESTLY CANNOT say if this machine really works or not. If I had a way to test it, I would. Would really like to get $100 but make me an offer. I'll include a 1 pound pack of 6011 rod, open but only missing a couple rods, and an auto darkening helmet.

NOTE: Other tools in picture NOT included nor are they for sale.

Schauer All Season 24v/10amp Battery Charger (Pocatello) $50

2009-11-23T19:32:10-07:00

Schauer All Season 24v/10amp Battery Charger.

Commercial, Auto, Personal metered fluid transfer pump (Shelley) $170

2009-11-23T19:19:02-07:00

Auto, Commercial, Personal metered high volume fluid transfer pump. never been used, new in box. 8 foot distribution hose, extendible drum tube. Fill-Rite made in Fort Wayne Indiana, Series 100.

Miller Self-Retracting Lifeline (Pocatello) $250

2009-11-23T19:14:56-07:00

Model LB331- 9355010, manufacture date April 2000, brakes function properly, retracts smoothly, green on snap hook indicates no fall since last serviced, 80+ feet of cable, weighs just over 40 pounds.

Commercial, Auto, Personal fluid transfer pump (Shelley) $75

2009-11-23T19:12:40-07:00

Auto, Personal, Commercial high volume fluid transfer pump. hand crank, tube extentions for barrel

sears radial arm saw (Soda springs) $140

2009-11-23T16:54:03-07:00

this is a 10 inch saw works good,comes with exter blades

Honda Snow blower-LOW HOURS! snowblower (Rexburg) $2000

2009-11-23T12:52:19-07:00

I have a Honda HS1132TAS Snow blower. Its the biggest, baddest thing honda makes. It has only been used for two seasons. Maybe 50 hours on it. Looks and works like new. We own a few apartments and need a plow more then a snow blower so we are trying to sell. Email or call. 503-200-8090, Thx David.

* 120-Volt AC electric starter
* Self-propelled, infinitely variable hydrostatic drive
* Track drive - best traction available
* Easy starting Honda OHV commercial grade engine
* 32" clearing width, 20" clearing height
* Clears up to 71.7 tons/hr
* Work light standard

Airless Paint Sprayer (Idaho Falls) $250

2009-11-23T10:38:43-07:00

Magnum XR5 airless paint sprayer. In great condition,used on 2 projects only. Internal components protected with pump armor. Comes with extra hose,filter and complete set of wrenches. PLEASE NO EMAILS $250.00 OBO Call Lee @ 208-403-8059

dust collector (lewisville) $200

2009-11-23T09:03:15-07:00

Good working dust collector. Designed to sit on top of a barrel. 1.5 hp motor. $200

call anytime
351-0741

Asphalt machine....Paver (Ca.) $13500

2009-11-23T07:21:09-07:00

1997 Leeboy 8000 diesel, hopper conveyors, low hours, ready to pave $13,500--------

Dewalt 6500 Portable Generator (Idaho Falls ) $600

2009-11-22T10:26:40-07:00

Dewalt 6500 Portable Generator you can run either 120 or 220. We used it with a stucco business which I shut down it is about two years old and my stucco guys used it for one winter to power there heaters, lights and radio. I want it out of my garage now that we don't use it I paid over a $1,000 for it but I will now take $600 first one with the cash can take it home or I can drop it off. Call my work # Brett 681-9999

Strut Tool BRAND NEW (Idaho Falls) $30

2009-11-22T07:58:28-07:00

I have a BRAND NEW Lisle Macphereson Strut Tool. It has never been used and is still in the box. I paid over $60.00 new and am asking $30.00.
Call 521-7611 for info or to see.

free hit counters

Macsimizer tool box (Am. Falls ) $1

2009-11-21T19:17:07-07:00

Up for sale is a Macsimizer bottom chest, It has barely been used and is in great condition. This box retails from Mac tools for $5,999, My loss your gain! Please e-mail for more info, and feel free to make offers! Cash and local pickup only. I am looking for $4500 obo. Need this gone, it's taking up room!

BRAND NEW SKIL SCROLL Saw (Rockford) $90

2009-11-21T17:43:17-07:00

New Skil scroll saw, variable speed, very little use. decided it isn't my thing. extra blades, owners manual. $90.00 Also, an older Delta scroll saw, heavy duty in very good condition. owners manual. missing one blade holder. $30.00

Gas powered air compressor (Ammon) $350

2009-11-21T12:19:08-07:00

Air compressor for sale or trade. In great condition. Has Honda motor. would love to trade towards gun or guns.
Thanks for looking

757-9473

COMPRESSOR DUAL TANK (POCATELLO) $40

2009-11-21T09:13:55-07:00

WORKS GREAT NOT USING IT SOME BODY ELSE COULD CALL 200-9807

Smithy Metal Lathe (Blackfoot) $1500

2009-11-20T19:51:32-07:00

It is a used metal lathe with a drill press and assorted accessories. In great condition, work great. Please contact Dale at 208-684-4218 or 208-589-4278

Drill Press (Rigby) $125

2009-11-20T14:44:21-07:00

Delta 12" VS drill press. Only used for one project.
Brand new condition.

If interested,
please email or call 745 6101

CNC Mill - looking for one that needs work (Jackson, WY)

2009-11-20T13:08:36-07:00

Looking for an older, small CNC mill that needs work. OK if not operable. Planning on doing a retrofit project.

Please call Jim at 307-690-0369

Craftsman Saw (Pocatello) $85

2009-11-20T11:20:05-07:00

In good working order with steel stand... $85
208-223-0033

Shopsmith Mark V (Idaho Falls) $1200

2009-11-20T09:13:44-07:00

I never use it, comes with jointer, band saw, sanding assembley, and lots of accessories.

Email me at
Christensen3193@msn.com

Dewalt Portable Planner TP300 (Victor) $150

2009-11-20T08:24:40-07:00

Dewalt Planner 12x5.9. Works great and in great condition! Call 208-270-1595. Thanks!

12" Dewalt Slide Miter Saw and Stand (Victor) $300

2009-11-20T08:20:51-07:00

12" Saw with Rolling material stand! Great saw comes with freshly sharpened blade! Call 208-270-1595.

3 Diamond Plate Tool Box (Ammon, Idaho) $150

2009-11-19T20:40:10-07:00

I have 3 diamond plate tool boxes. They fit full size pickups. Buy all three for $350 or $150 each. I will post pictures soon. Call Brad @ 681-6887

Cherry Picker / Hoist 2 ton (rexburg) $190

2009-11-19T20:38:42-07:00

I have a cherry picker in my garage that i recently used for an engine swap. The swap is done and i too am done with this tool. Its in excellent shape and is going for cheap. This is a completet set, both leg extensions, pins, and hoist rod. I have no idea on the brand or age. My guess is that this is less than 2 years old. Paint is all in good shape. No rust. The hydraulic works excellent with zero leaks. Call, text, or email 801-708-2532

also willing to make trades for other tools or electronics. Let me know

mckay

DO NOT EMAIL WITH ADVERTISEMENTS. SERIOUS BYUERS ONLY.

Utility Trailer For Sale (Arimo, ID) $1750

2009-11-19T18:30:38-07:00

This is a dual wheeled trailer heavy duty that was used to haul tools and equipment to job sites. Tongue has area for a fuel tank that can be used to fill up equipment so as not to have to run out during a job. Each side has doors for tools and equipment storage. The large doors on the tongue end of the trailer allow that area to be opened from either side. Large box area between the sides can be used for hauling larger pieces and it has a heavy duty bumper that a vise or whatever could be attached to. Paint is in rough shape but trailer is sturdy. This trailer is located in Arimo, ID at this time. I would like $1750.00 or you can make a serious offer. I can be reached at 208-284-9303 ask for Brenda or you can email me.
Please DO NOT send any other kind of offers to this address or phone number.

Antivibration Mesh Mounts (Idaho Falls) $350

2009-11-19T18:17:33-07:00

These are 4 mesh anti-vibration mounts, never been used. You can order these online at www.vibrationmounts.com for $254.09 each. I will sell all 4 for $350.00. Please respond via email or call 208-206-2874, SERIOUS INQUIRIES ONLY

CAP & BASE:
Aluminum Alloy
CENTER STUD:
Aluminum Alloy
ISOLATOR:
Knitted Stainless Steel Mesh
FINISH:
Alochrome 1200 on all Aluminum components
FOR LOADS OF:
10 to 1000 Pounds (4.6 to 453.5 kgf)
APPLICATIONS:
� LIGHTWEIGHT MACHINE TOOLS
� PRINTING AND TEXTILE MACHINERY
� STAINLESS STEEL MESH

CHARACERISTICS:
Although normally intended to be used in compression, they will accept accidental tensile loads. The mounts should be fixed to the floor for loads in excess of 220 lb. (99.8 kgf) or when working conditions require it. They will accept compressive loads at least five times the static load.

Location: Idaho Falls
it's NOT ok to contact this poster with services or other commercial interests

power panel (teton valley) $500

2009-11-19T15:36:33-07:00

temp pwer panel for new consruction with tails, outlets and unistrut stand. retails over 1200 must sell

Plumbing Service Equipment (Idaho)

2009-11-19T14:49:13-07:00

We have several drain cleaning tools for sale. Please call 208-407-2994 for more information and pricing. Way better return on investment than new!!!

1. General Hot Rodder- heavy duty drain machine- with 4 baskets of cable- Used Once!
2. Mytana Medium size jetter with rolling cart
3. Gator Cams large and small with monitor
4. Vaporooter- foaming root treatment applicator system- still new!
5. We also have several other drain snakes, mini jetters, and pipe thawing equipment

chainsaws (idaho falls) $100

2009-11-19T11:50:40-07:00

craftsman chainsaw like new 42 cc 18 inch bar 100.00
echo 50cc 21 inchbar 150.00 call 208-346-0596

lumber rack (rigby) $100

2009-11-19T09:48:00-07:00

heavy duty lumber rack has bilt on tie downs and plumer box if you want them on there 100.00 firm call 521-3110

old cast iron fireplace (idaho falls) $20

2009-11-19T09:35:02-07:00

old cast iron fireplace 20.00 to just get it gone used it last year
just needs cleaned up a little i dont know any measurements you
will just have to come look first come first serve

concrete tool (pocatello) $25

2009-11-18T21:19:22-07:00

25 obo brand new never used

auto body tool (pocatello) $20

2009-11-18T21:10:21-07:00

its a pry and bumping spoon brand new it costs 30 asking 20 obo

MIG WELDER (Rigby ) $350

2009-11-18T17:25:13-07:00

This is a Lincoln SP100 Mig Welder, its in very good condition. Please call (208)390-6189 if interested.

Clarke Floor Sander or Polisher (Pocatello) $500

2009-11-18T16:42:03-07:00

FM-1500HD CLARKE FLOOR MAINTENANCE MACHINE- HAS EXTRA SANDING DISCS WITH IT --IN VERY GOOD CONDITION---251-0578

Antivibration Mesh Mounts (Idaho Falls) $350

2009-11-18T15:48:07-07:00

Duracraft Woodlathe (Pocatello, ID) $100

2009-11-18T14:51:11-07:00

Duracraft woodlathe, 3/4hp motor. Included is a 4" faceplate for turning bowls, 2 live centers, 2 different size tool rests, a metal stand that will roll if you need to move it. This lathe will turn up to about 40" pieces. It has a 12" swing. If you wanted to turn bigger than 12", it has outside threads. This lathe has a "1MT drive. 5 speeds. Call or reply to this ad anytime. 208-406-3264

genisys scan tool (Idaho Falls) $1000

2009-11-18T13:59:50-07:00

genisys scan tool 3.0 2006 domestic and 2005 foreign. comes with smart cable and all adapters. reads abs and air bag codes also.I purchased scanner in 8/15/2006 for 2,499.00 I still have reciept.can see @ Tunex in Idaho Falls @ 1150 e lincoln rd asking $1,000.00 or make offer.

10" Delta Table Saw & Extras (Rockford) $500

2009-11-17T19:27:42-07:00

10" Model 10 contractors Delta table saw. also- Woodsmithshop crosscut sled. Molding set of 7, change saw into a jointer, plainer, shaper. Full set of Dado blades. Saw is on a wheel dolly. Owners manual. Extras worth over $300.00, all included. All in excellent condition. 317-1973

RIDGID 13 inch Thickness PLANER (Soda Springs) $250

2009-11-17T15:23:33-07:00

This planer is almost like new. Instruction book comes with it. They sell for about 500 bucks. I will take $250.00. Located in Soda Springs.

Craftsman snowblower LIKE NEW (Pocatello) $339

2009-11-17T15:18:32-07:00

NICE snow blower $339 like new! rubber paddles are in great shape.
Starts right up with electric start and includes cord
has fresh fuel & fuel stabilizer in tank. No shoveling this winter...237-2009 call today
2 cycle engine requires fuel mix. Cap says 40:1

Commerical Mower - Husqavarna 42" Zero Turn (Rexburg) $3500

2009-11-17T11:58:01-07:00

George 716-0661

12" Craftsman Band Saw (Rexburg) $175

2009-11-17T10:26:38-07:00

12" Craftsman tilting head 2 speed bandsaw with 1 1/8 hp motor call 208-709-8447

Craftsman Professional Jointer/Planer (Idaho Falls) $475

2009-11-17T09:58:24-07:00

For sale Craftsman Professional 6-1/8 in. Jointer/Planer. This jointer has only been used a few times and is in great shape. The blades remain very sharp and I have had no problems with it. I paid $580 for it new and I'm asking $475. Go ahead and make me an offer if you want. It is similar to the pick below, the only difference is the switch location. You can email me with questions or text/call (208) 403-1239

Troy-Bilt SuperBronco Tiller (Idaho Falls) $500

2009-11-16T23:57:36-07:00

rear tine tiller, 6.75 hp B&S engine, great condition with < 80 hrs operation

Great Christmas present!

Truck Tool Boxes for Sale (Pocatello, Idaho) $100

2009-11-16T16:48:24-07:00

Cabela's Heavy-duty, black powder-coated truck tool boxes. Weather-proof locking door system. Reversible doors allow boxes to be used on left or right side .--251-0578

WRENCHES $2. each, Thorsen, Armstrong, Proamerica, Kal, Duro/Indestro (NEW $2.oo BUCKS ea. / Hidden Treasures) $2

2009-11-16T14:56:46-07:00

NEW NEW NEW ............WRENCHES $2. each............., Thorsen, Armstrong, Proamerica, Kal, Duro/Indestro............ Sizes are.....15/16ths / 7/8ths.......... 24 / 27 mm............. Thats it........You will be amazed, 35000 sq. feet of everything,... Tons of used furniture..., Better buys on new..., I buy closeouts..., I buy Estates..., I buy government surplus..., Collections, I sell a ton of mattress sets..... YOU NAME IT WE PROBLY GOT IF WE CAN FIND IT...... THIS IS ONLY AN EXAMPLE OF THE THINGS WE HAVE......... We Have 35000 SQ. Feet of New & Used home furnishings.... HIDDEN TREASURES, In Shelley, 238 S Emerson.. Open 9-6 Mon-Sat..... Thanks

Craftsman Router Edge Guide (Idaho Falls) $7

2009-11-16T12:02:54-07:00

New Craftsman Router Edge Guide
For use with Craftsman Routers 9-17507 and 9-27500 Only
Supposed to have 2 adjustment knobs, but is missing 1
$7.00

Task Force Saw (Blackfoot) $70

2009-11-16T10:01:58-07:00

Task Force 10 inch table saw with stand. We have the operation manual and everything. In great condition. Call us at 785-0919 for more information. $70.00

Box of ratchet straps (Blackfoot) $100

2009-11-16T09:53:49-07:00

A box of about 20-25 straps for a step deck or flatbed semi trailer with the attached ratchets. We sold our semi and no longer need these.

Chains and Binders (Blackfoot) $500

2009-11-16T09:52:05-07:00

Four 1/2 inch by 25 foot logging chains and Four 1/2 inch ratchet binders. We sold our heavyhaul semi and no longer need these.

Drill Press (idaho falls) $125

2009-11-15T18:35:02-07:00

Ryobi drill press
excelent condition
laser sights
125.00
208-552-5253

pipe rack for full size truck (rigby) $100

2009-11-15T17:44:18-07:00

Pipe rack for a full sized truck. I have gotten out of construction and don't need it any more. Call brian @ 390-2007 for more and I also have ladders and scaffold planks for sale if interested.

Lincoln Arc Welder (Blackfoot) $150

2009-11-15T11:25:57-07:00

This welder does a great job but if you really need one Home Depot has it new for $280 or Call Ted 208-684-5250

Lincoln Stick Welder MAKE ME AN OFFER (Felt) $125

2009-11-15T00:41:49-07:00

I got this in a trade deal and I honestly can't say if it works. The guy told me it does but there is no plug on the power cord and even if there was, I have no place to plug it in at in my house. Its a 225 amp, 230 volt. Like I said, I HONESTLY CANNOT say if this machine really works or not. If I had a way to test it, I would. Would really like to get $125 but make me an offer. I'll include a 1 pound pack of 6011 rod, open but only missing a couple rods, and an auto darkening helmet. Will also trade for ??? Let me know what you have.

NOTE: Other tools in picture NOT included nor are they for sale.

MONTGOMERY WARD POWR-KRAFT TABLE SAW (Shelley) $60

2009-11-14T18:55:45-07:00

Model # 94TTN 2296A This was made in the USA.

Scissor Lift (Rexburg) $1000

2009-11-14T11:54:32-07:00

George 716-0661

Masonry Saw (Rexburg) $200

2009-11-14T11:51:57-07:00

George 716-0661

Electric Cement Mixer (Rexburg) $300

2009-11-14T11:47:18-07:00

George 716-0661

Tile Saw (Rexburg) $250

2009-11-14T11:45:14-07:00

George 716-0661

Sears Band Saw (Rexburg) $100

2009-11-14T11:41:17-07:00

George 716-0661

Ready Heat Heater (Rexburg) $100

2009-11-14T11:31:05-07:00

George 716-0661

Dual Tank Rol-Air Air Compressor (Rexburg) $300

2009-11-14T11:26:53-07:00

George 716-0661

Husqavarna Demolition Saw (Rexburg) $300

2009-11-14T11:24:43-07:00

George 716-0661

Stanley Torque Wrench (Lewisville, ID) $50

2009-11-13T22:41:17-07:00

Stanley Torque Wrench with case. Up to 100 ft-lbs. Asking $50.00. My access to email is infrequent so please call 208-403-8489 and leave message if no answer.

Coleman Air Tools (Lewisville, ID) $100

2009-11-13T22:38:48-07:00

Coleman Air Power Tool Kit. Asking $100.00. My access to email is infrequent so please call 208-403-8489 and leave message if no answer.

RYOBI gasoline powered hammer ER 160 (Spencer) $350

2009-11-13T16:40:05-07:00

RYOBI GASOLINE POWERED PNEUMATIC ROTARY HAMMER ER-160
HALF THE PRICE
Still in the box never been used phone 208 374-5517

RYOBI gasoline powered impact drill (Spencer) $250

2009-11-13T16:28:32-07:00

new, never been used, still in box. EH 1930 gasoline powered impact drill
HALF THE PRICE AND IS NEW

Husqvarna 359 chainsaw, cut 2 cords, new (jackson) $425

2009-11-13T13:15:10-07:00

This saw has a 20in bar and brand new cost 550+ It has cut about 2 cords of wood, just bought it a few months ago. Cleaned and maintained after each use personally..I am a sawyer for the forest service and know the importance of this. Basically it has done what I need it for and now I wanna sell it. bar and chain excellent condition and powerhead in excellent...Great deal on this new saw.
Calll matt
503 913 7562
located in jackson

Brake Lathe (Shelley) $2000

2009-11-13T13:06:51-07:00

Brake Lathe, Good Condition, Asking $2000. We have 2 and only need one. If like to take look at it call 521-6393. Thanks

craigslist | tools in east idaho

2 1/4 ton floor jack (Ammon) $20

Miter Saw (Idaho Falls)

Christmas Present! Lathe and Gouges (Idaho Falls) $500

MATCO Road Box (Firth, ID) $1500

Matco tool box must see hot rodder tool box (ammon)

20 gal Portable Compressor w/50ft Hose reel (Mackay) $175

***Bosch 12" Compound Miter saw, works good*** (Rexburg,ID) $275

DAMAGED 24' Louisville Fiberglass Extension Ladder (Pocatello, ID) $50

24' Louisville Fiberglass Extension Ladder (Pocatello, ID) $225

Dust Collector (Pocatello Idaho) $350

18v milwake sawzall (idahofalls) $100

18v dewalt (Idahofalls) $200

Riding Lawn Mower (Pocatello) $450

2 HP Plunge router (Idaho Falls) $70

Snow Plow for UTV (Rigby) $450

IR HYD. COMPRESSOR (ID)

6.5 HP Snow Blower with Tracks (Driggs) $425

loading ramp set - arched folding $198

*** NEW *** Honda Portable Air Compressor (Rexburg) $1100

***NEW*** Honda 3 inch Water pump (Rexburg) $300

3500-watt Craftsman Generator (Idaho Falls) $500

Snow Thrower (Rigby) $200

water cooled tig torches/water circulator (Idaho Falls) $125

Snow blower for riding tractor -Make Offer (Pocatello) $399

Wood Lathe (Blackfoot) $350

Milwaukee 18v Drill Brand New (Rigby) $160

Propane Heaters and 100 # Bottles (IF) $1

Pick-up Bed Trailer (IF) $1

Shopsmith Mark V (Idaho Falls) $1200

Lincoln Stick Welder (Teton Valley) $100

Schauer All Season 24v/10amp Battery Charger (Pocatello) $50

Commercial, Auto, Personal metered fluid transfer pump (Shelley) $170

Miller Self-Retracting Lifeline (Pocatello) $250

Commercial, Auto, Personal fluid transfer pump (Shelley) $75

sears radial arm saw (Soda springs) $140

Honda Snow blower-LOW HOURS! snowblower (Rexburg) $2000

Airless Paint Sprayer (Idaho Falls) $250

dust collector (lewisville) $200

Asphalt machine....Paver (Ca.) $13500

Dewalt 6500 Portable Generator (Idaho Falls ) $600

Strut Tool **BRAND NEW** (Idaho Falls) $30

Macsimizer tool box (Am. Falls ) $1

BRAND NEW SKIL SCROLL Saw (Rockford) $90

Gas powered air compressor (Ammon) $350

COMPRESSOR DUAL TANK (POCATELLO) $40

Smithy Metal Lathe (Blackfoot) $1500

Drill Press (Rigby) $125

CNC Mill - looking for one that needs work (Jackson, WY)

Craftsman Saw (Pocatello) $85

Shopsmith Mark V (Idaho Falls) $1200

Dewalt Portable Planner TP300 (Victor) $150

12" Dewalt Slide Miter Saw and Stand (Victor) $300

3 Diamond Plate Tool Box (Ammon, Idaho) $150

Cherry Picker / Hoist 2 ton (rexburg) $190

Utility Trailer For Sale (Arimo, ID) $1750

Antivibration Mesh Mounts (Idaho Falls) $350

power panel (teton valley) $500

Plumbing Service Equipment (Idaho)

chainsaws (idaho falls) $100

lumber rack (rigby) $100

old cast iron fireplace (idaho falls) $20

concrete tool (pocatello) $25

auto body tool (pocatello) $20

MIG WELDER (Rigby ) $350

Clarke Floor Sander or Polisher (Pocatello) $500

Antivibration Mesh Mounts (Idaho Falls) $350

Duracraft Woodlathe (Pocatello, ID) $100

genisys scan tool (Idaho Falls) $1000

10" Delta Table Saw & Extras (Rockford) $500

RIDGID 13 inch Thickness PLANER (Soda Springs) $250

Craftsman snowblower LIKE NEW (Pocatello) $339

Commerical Mower - Husqavarna 42" Zero Turn (Rexburg) $3500

12" Craftsman Band Saw (Rexburg) $175

Craftsman Professional Jointer/Planer (Idaho Falls) $475

Troy-Bilt SuperBronco Tiller (Idaho Falls) $500

Truck Tool Boxes for Sale (Pocatello, Idaho) $100

WRENCHES $2. each, Thorsen, Armstrong, Proamerica, Kal, Duro/Indestro (NEW $2.oo BUCKS ea. / Hidden Treasures) $2

Craftsman Router Edge Guide (Idaho Falls) $7

Task Force Saw (Blackfoot) $70

Bosch 12" Compound Miter saw, works good (Rexburg,ID) $275

* NEW * Honda Portable Air Compressor (Rexburg) $1100

NEW Honda 3 inch Water pump (Rexburg) $300

Strut Tool BRAND NEW (Idaho Falls) $30